Altium designer 17 3d free

Parent page: Pre-layout Stage. There are two rigid-flex design modes available in Altium’s PCB design software. The original, or standard mode, referred to as Rigid-Flex, supports simple rigid-flex designs. If your design has more complex rigid-flex requirements, such as overlapping flex regions, then you need the Advanced Rigid-Flex mode also known as rigid-flex 2. The mode is chosen in Tools menu in the Layer Stack Manager. The Board Shape defines the overall shape of the finished board.

Click through the slides to see the three Board Regions that make up the rigid-flex shape, and the finished board in 3D. The Board Shape, also referred to as the board outline, is a closed polygonal shape that defines the overall extents of the board. Tthe Board Shape is used by the software for:. The Board Shape is created from one or more Board Regions.

For designers working on a single-region board design, the following commands can be used to define the Board Shape:. The difference between the Define Board Shape from Selected Objects command and the Create Board Region from Selected Objects command is that the first command replaces all existing Board Regions with the new region that is created when the command is run, whereas the second command creates an additional Board Region, without removing any existing Board Region s.

The video demonstrates creating the Board Shape from selected objects and then placing Split Lines to create the three regions needed. The video first demonstrates creating the Board Shape from selected objects and then slicing the shape to create the three regions needed. Then it shows an alternate approach, where the three Board Regions are defined from selected objects. Note that these demonstrations are using Rigid-Flex 2. The next step is to import the board’s shape as a.

DXF or. DWG file. Note that the shape to be imported must be a closed shape and internal cutouts are not automatically created but can be defined later from imported objects. The software will attempt to find the shape based on the centerline of the selected objects.

It will offer to use a tracing algorithm instead. Only choose this option if your design can accept the impact of this difference. This feature redefines the board shape based on a surface face of an imported 3D model. It can be used to quickly create a complex board shape and helps integration between electronic and mechanical design areas.

You will also be prompted to update the shape, which helps if the shape is still under development and updates are expected. Only surfaces aligned with the X-Y plane can be used to create the board shape.

If you select a model surface that requires alignment in the X-Y plane, you will be asked in a Confirmation dialog to align the surface before you can continue. This dialog also allows you to place the model using the selected face in relation to either the top or bottom surface of the board. This means that the vertical position of the model can also be set at the same time. After the board shape has been redefined, you will be given the option to hide the 3D body.

Use this command when the Board Shape exists but there are currently no objects along the boundary. Situations where this command can be useful include:. A board cutout can be placed anywhere in the Board Shape. Note that the cutout is actually a Region object configured to be a negative object. A Board Cutout has been placed on the Board Shape. If the board cutout is an unusual shape, such as a circle, it can be easier to create an outline of the cutout shape using tracks and arcs for example, Place » Arc » Full Circle , select the shape, and then convert it to a Board Cutout Tools » Convert » Create Board Cutout from Selected Primitives.

Polygons that overlay a solid region board cutout will pour as close to the edge of the cutout as allowed by the applicable Clearance design rule. A specific Clearance design rule can be created if required, which could, for example, be scoped to apply between IsBoardCutoutRegion and InPolygon. A common approach used to cut the finished board from the fabrication panel is to mill or route the board out of the panel. Board cutouts can also be routed out. This can be done manually or automatically by the software.

A Board Cutout in the first image, with a Route Tool path defined in the second image. As well as the Board Shape, you also should define a placement and routing boundary around the edge of the board. Alternatively, this can be done manually by placing objects on the keepout layer. Objects placed on this layer define a no-crossing-allowed boundary for components and routing. Typically you want objects such as components and routing to be a certain distance from the edge of the board; this distance can be controlled by setting the applicable routing and component placement design rules.

You can also define other routing and component keepout areas for mechanical objects, such as screw heads or other mounting requirements. A keepout boundary defined by placing standard line objects on the keepout purple layer.

Defining the Board Shape in Altium Designer. Using Altium Documentation. The default Board Shape in a new PCB document is a rectangular shape 6 inch x 4 inch, or mil x mil, or For specific project templates that can be used when creating a new PCB project, the associated PCB document in each case has a specific Board Shape according to the form factor of the board. The current viewing mode for the PCB document can be changed using the corresponding commands from the main View menu.

Alternatively, change views quickly using the 1 Board Planning Mode , 2 2D and 3 3D keyboard shortcuts. Learn more about placing and editing a Board Region. There are also a number of commands for working with Board Regions, learn more about the commands for converting between drawing primitives and board definition objects. Printer-friendly version. Found an issue with this document? Contact Us Contact our corporate or local offices directly.

We’re sorry to hear the article wasn’t helpful to you. Could you take a moment to tell us why? Connect to Support Center for product questions. I do not want to leave feedback.

Altium Designer PCB Library – FREE – Footprints – Symbols – 3D Models

You can select multiple components and apply the same display controls to them at once using the Highlighted Models options. Multiple models can also be selected and changed in one step.

The 3D Bodies Display Options controls allow you to control the display of 3D bodies without having to modify the current view configuration. Display options set from the PCB panel are not saved as part of the view configuration. Using Altium Documentation. Now reading version Panels can be configured to be floating in the editor space or docked to sides of the screen. If the PCB panel is currently in a group of panels, use the PCB tab located at the bottom of the panels to bring it to the front.

Take a look at what download options are available to best suit your needs. Leverage the most powerful, modern and easy-to-use PCB design tool on the market. Give Altium Designer a test run, download the free trial.

Altium Concord Pro automates organizing, storing, sharing, and maintaining up-to-date electronic component information providing a single source for all component information directly in your design environment. Is a transformative agile turnkey solution for structured, workflow-driven PCB design for teams. As a complete solution with a focus on rapid customer success, it is deployed in a structured way with configurable off-the-shelf modules with assistance from Altium professionals.

The innovative solution brings to your organization key capabilities including process management, workflow authoring, integration to enterprise systems such as PLM and much more. Provides electrical and mechanical team collaboration to synchronize design intent including changes to board shape, component placement, and copper – so you can rest assured that your electronic and mechanical designs come together.

Take advantage of a professional PCB design tool for the modern engineer. CircuitStudio is simple to use while being powerful enough to tackle challenging design requirements. Check out our Other Installers page for more information about additional software and previous releases.

Altium Designer is the tool of choice for creating the next generation of smart, connected electronics products and devices. Join AltiumLive to explore more of the Altium community and interact with like-minded design engineers.

Mobile menu. Explore Products. Altium Community. Education Programs. Latest version: Release date: Installation and management. Download exe, The 3D Body Dialog. A 3D body is a primitive polygonal design object that is used to represent the 3 dimensional shape of the physical component that is mounted on the assembled PCB. Any number of 3D body objects can be used together to create complex shapes.

For more information about 3D Body, click here. Select a model type for the 3D body object. The editing and control options vary for each type, providing controls necessary for sizing and positioning in the 3D workspace.

Available options are:. If you are defining the 3D Body object, and want to reference a 3D model that is stored in an Altium Vault, this can be done from within the 3D Body dialog, when defining the properties for the body. Snap points are reference points that can be useful when moving or aligning 3D Bodies to other PCB objects.

Altium designer 17 3d free

Never lose context and time when reviewing comments. Attach comments to an entire document or a specific object, visually highlight a problem area directly in the design, and tag people to quickly resolve issues, all without leaving your design environment or from any web browser. Eliminate costly and time-consuming miscommunications with manufacturing with version-controlled release packages that can be shared in a single click.

Interact and collaborate with mechanical designers like never before in a photo-realistic, 3D design environment. Easily work together with your mechanical team, and forget about the days of swapping design files.

Confirm that 3D components, case assembly, and PCB clearances meet your mechanical requirements in real-time. Understand how different systems in your product come together in Native 3D and easily confirm fit and connectivity. New technology. Better value. Designed to meet the needs of every engineer designing electronic products.

Your complete connection to the world of electronics product design. Learn more. Get the help you need, right when you need it with live chat and phone support, access to the AltiumLive community, and feature requests. Quickly capture your design intent with a rich set of wiring tools, design verification, transparent netlist creation, and variation management.

Effortlessly design advanced electronics with intuitive navigation through all hierarchy levels, nets, and components.

Make the best part choices at design time with an intelligent platform that brings together schematic symbols and PCB footprints, lifecycle status, and supply chain planning in one centralized location. Explore ideas before committing to manufacturing with fast and accurate simulation in an advanced SPICE engine. Efficiently explore an optimal layout with intuitive board planning technology.

Native 3D support, layer stack management, and high-end controls including etch factor and surface roughness models give you all the power you need in a single design space. Rapidly verify connectivity and design flexible circuitry for multi-board setups with product-level wiring, mating, and Native 3D. A clear definition of flex zones and bending lines makes it easy to verify fit for Rigid-Flex designs.

Route your way with a high-performance engine that lets you push, slide, hug, walkaround, and tune for delay at any angle. Expertly design high-speed electronics with a powerful tuning engine. Includes advanced pattern support, an EM solver for accurate propagation delay, impedance extraction, and Easy HDI structure integration. Effortlessly collaborate with your mechanical designer with bi-directional data transfer between Altium Designer and your MCAD tool.

Connect your team and design data together in one centralized location for easy access. A scalable platform meets the needs of growing companies, including design workspaces, project lifecycle and release management, and team collaboration. Click the button to browse and locate the folder containing your 3D Model files, then finally click the Add button to include that folder in the Model Search Path list.

Note when the Generic 3D Model option is chosen, the 3D Body object simply acts as a container for it, and it is automatically re-sized to enclose the chosen model. If a newer revision of the linked Item is available, simply click the Update to latest button, to use that latest revision. Printer-friendly version. Found an issue with this document? Contact Us Contact our corporate or local offices directly. We’re sorry to hear the article wasn’t helpful to you. Could you take a moment to tell us why?

Connect to Support Center for product questions. Parent page: PCB Objects. A sphere, a cylinder and 4 extruded rectangles have been used to create the 3D body for an LED.

A 3D body is a primitive polygonal design object that is used to represent the 3 dimensional shape of the physical component that is mounted on the assembled PCB. Any number of 3D body objects can be used together to create complex shapes. The available 3D body shapes include extruded polygon, cylinder and sphere. They can be placed into a PCB library component footprint. Their overall shape is displayed when the editor is switched to 3D display mode press the 3 shortcut.

Placing 3D Body objects to define the components’ shape allows the designer to get a real sense of the arrangement and organization of the components on the assembled board. As well as being able to see what the finished board will look like, real-time 3D clearance checking can be performed. Working in the PCB Editor’s 3D mode is greatly enhanced by using a 3D mouse , this makes the process of moving and turning the component or board very easy, it is much like holding that component or board in your hand.

After launching the command the 3D Body dialog will open. Placement is made by performing the following sequence of actions:. During placement 3D model item revisions can be referenced from the Vault If you are using Altum Vault 2. The 3D Body object can then be fine-tuned as required. To place:. Conversely, if you are defining the 3D Body object, and want to reference a 3D model that is stored in an Altium Vault, this can be done from within the 3D Body dialog, when defining the properties for the body.

While placing an extruded 3D body there are 5 available corner modes, 4 of which also have corner direction sub-modes. During placement:. This method of editing allows you to select a placed 3D body object directly in the workspace and change its size, shape, or location, graphically.

For an extruded 3D body, click once on the object to select it, which puts it into edit mode. The outer shape of the 3D body object is defined by a series of edges: where each edge is represented by an end vertex at each end, and a center vertex in the middle, shown as a solid white squares.